Need to Adjust Governor on a Briggs Engine
So, when you are installing new governor springs, make sure there are no needle-nose pliers involved. However, that’s not a good choice, it’ll damage the springs. For example, some people try needle-nose pliers. Keep In Mind – there’s a chance the Using governor springs could stretch too much if you use improper tools. Using the information of the length, now you should be able to do that though. And then it’s tricky to get them back, as you’ll not be able to recognize which one is which. Sometimes you might accidentally end up having the two springs come off that connects to the carburetor. However, the primary spring is lengthwise bigger than the secondary spring. The secondary spring has a longer oval-shaped end just like the primary one. And these are primary and secondary springs. One is in charge of the engine throttle, while the other works for the governor. In a way that the Briggs ideal point for proper and correct engine power generation can be achieved.Īlso, you might have already noticed, there are mainly two springs here. And the spring is in charge of gripping the open throttle. Here’s a visual representation that should help you understand the Briggs and Stratton governor spring location.Īs you can see, the Briggs and Stratton governor spring is within the engine situated governor. 3 Final Words The Briggs and Stratton Governor Spring Diagram
